Refractory Zirconia Ceramic Nozzle for Tundish Nozzles
$5.00
100 in stock
Product Name | Zirconia ceramic nozzle for Tundish |
Material | ZrO2 |
Key words | for melting |
Advantage | High temperature resistance |
Zirconia ceramic nozzle for Tundish
Introduction
We manufacture a very wide range of high quality Zirconia Nozzle Insertss. Zirconia Nozzle Insertss are basically used for
controlling the flow of steel from the Tundish to the Continuous Casting equipment. Different kind of Zirconia Nozzle Insertss
include, Alumina, Alumina Carbon, Zirconia Alumina Nozzles, which are manufactured for single to multiple casting application.
Alumina Carbon Zirconia Nozzle Insertss are made with Isostatic Pressing Process. which gives better performance compared to other
nozzles. Zirconia Nozzles are manufactured using 65% to 95% Zirconia. it can be used where application demands Timing time upto
40hrs for Single to Multiple Casting.
Advantages
Zirconia Nozzle Inserts is an important component of continuous casting. Through the Zirconia Nozzle Inserts, the molten steel
flows from the tundish into the crystallizer. During this process, the outlet aperture will be eroded and widened, the amount of
molten steel per unit of time increases and the surface of molten steel in the crystallizer rises, which requires increasing
casting speed to digest the excess molten steel. With the further erode and widen of outlet aperture, adjusting casting speed can
not digest all the excess molten steel, then releasing the excess molten steel through the mouth of the emergency is adopted
though it's a waste of steel enterprises. Therefore, whether the outlet aperture of Zirconia Nozzle Inserts remains constant is a
most important measure of the quality. Usually, it is measured through the total use time in actual production.
Our Zirconia Nozzle Inserts has the properties of high refractoriness, good resistance to erosion, and can bear rushing scour etc.
production line, material warehouse, molding workshop, sintering workshop, drying workshop, quality inspection room, etc
good division of labor and cooperation, strong sense of responsibility, to ensure the efficient operation of the business.
A: Please send your drawing or the details of your demand to us, then we will quote to you.
Q: Are you trading company or manufacturer ?
A: We are professional manufacturer in China ,and have in this line for almost 10 years.
Q: Would it be possible for us to visit your factory?
A: Sure, we welcome you at any time! Seeing is believing.
Q: Do you provide samples ? is it free or extra ?
A: Yes,we do.The sample expense will be deducted from the value of your order.
Q: How about the delivery time?
A: If we have the same size in stock, we will send out in 3-5 days, if it is customized part, the production will need about 15-25days.
| Title |
Default Title |
|---|
Reviews
Clear filtersThere are no reviews yet.